The crimping machine is composed of a frame, an automatic lifting mechanism and an automatic crimping mechanism. The utility model has a threaded clutch welded on the frame. The main shaft is divided into five sections, three straight sections, two sections of thread segments, and three rotating rods are distributed at 120 degrees. The rotating rod has a roller at one end and a roller at one end. The motor drives the automatic lifting mechanism and the automatic crimping mechanism through the worm wheel and the worm drive, and the entire crimping process is self-winding.
Completed. The utility model has the advantages of simple operation, flexible use, low cost and high efficiency.
The working principle of the crimping machine:
By rotating the workpiece at a high speed, the upper and lower sides of the workpiece are pressed and deformed to form a curling effect.
Performance introduction:
1. The main rotation of the workpiece, the air pressure is pressed, the oil pressure is cut into the edge or curled.
2, replace the different rollers, can roll inside and outside, press straight edge, rib groove, etc., a multi-purpose machine.
3. According to the size of the workpiece, the position of the cylinder or cylinder can be adjusted by the hand wheel to facilitate elastic production.
4. After the workpiece is processed, the working surface has smooth curvature, no damage and no wrinkles.
5, with automatic counting function, with adjustable working time, there are two manual and automatic control methods.
6. Single-head horizontal horizontal trimming or single-head vertical vertical crimping.
7. Configure the brake motor, the movement position is accurate, and there is no inertial sliding. The trimming work is stable and the curling accuracy is high.
8. The hydraulic system is built-in, and the appearance is neat, stable and does not occupy space.
Application range:
Applicable to all kinds of round, trimming, trimming, curling, flanging, wrapping, car edge, scribing, rib groove, etc. of different round and round metal hardware products.