Today I will introduce you to the key to the operation of the polishing machine and how to set the polishing rate to the highest.

1. The key to the operation of the polishing machine is to try to obtain the maximum polishing rate in order to remove the damaged layer generated by the polishing as soon as possible. At the same time, the polishing damage layer will not affect the final observed tissue, ie, it will not cause false tissue.

2, the former requires the use of coarser abrasives to ensure a larger polishing rate to remove the polished damage layer, but the polished damage layer is also deep.

3. The latter requires the use of the finest material to make the polishing damage layer shallower, but the polishing rate is low.

4. The best way to solve this contradiction is to divide the polishing into two stages. The purpose of rough polishing is to remove the polished damage layer. This stage should have the maximum polishing rate. The surface damage caused by rough polishing is a secondary consideration, but it should be as small as possible. Secondly, fine polishing (or final polishing). The purpose is to remove surface damage from rough polishing and minimize polishing damage.

5, the automatic polishing machine is relatively simple to operate, the operator only needs to place the object to be polished in advance on the corresponding fixture. Secure the clamp to the automatic polisher table. The automatic polishing machine is started, and the automatic polishing machine finishes the polishing work within the set time, and automatically stops, and the object can be removed from the workbench. Before the automatic polishing machine is polished, the distance between the polishing head and the work surface needs to be adjusted. In order to achieve the best contact results, throw the best results.